3M™ MicroTouch™ Display M1500SS User Guide
11
3M Touch Systems, Inc. Proprietary Information
Connecting the Display
To connect the M1500SS Display:
1.
Turn off your computer. You should always turn off the computer before connecting
or disconnecting any device.
2.
Connect one end of the video cable to the video connector on the display. Connect
the other end to the video card in your computer.
3.
Connect one end of the touch sensor cable (either serial or USB) to the display.
Connect the other end to an available port on the back of your computer. If you are
using a USB connection, make sure you have installed the Touch Software drivers
prior to connecting the touch sensor cable.
4.
Plug the AC/DC power supply into the M1500SS Display. Be sure to use the power
supply included with the display.
Figure 9 Identifying Your Display Connections
5.
Connect the power cable to the AC/DC supply. Connect the other end to the
appropriate AC outlet.
Figure 10 Connecting the M1500SS Cables to your Computer
Video Connection
Power
Microphone out
Touch Sensor
Line In
Summary of Contents for M1500SS MicroTouch
Page 2: ......
