DT-01715C
Travel Document Reader User Guide
© 3M 2006 All rights reserved.
19
Reading Non-standard Documents
This section describes proper document placement for thick documents, documents with
oversized covers or damaged or flimsy pages in travel documents.
Some travel booklets are too thick to fit easily under the document clip. Others may have fragile
or flimsy pages (such as visa pages) which require extra care in handling.
1.
Open the booklet to the page you want to read.
Raise the light shield and press the clip lever.
Slide the single page under the clip and release the lever.
Note:
You may want to insert a damaged or flimsy page using the cover or adjacent
pages as support.
2.
Make sure the upper left corner of the page is aligned with the upper left corner of the
document window.
When the document reaches its proper position, the reader will automatically start
scanning the document. Do not move the document during the scanning process.
Note:
The light shield must remain down for an accurate read. The operator may
release the document. This hands-free function allows the operator to focus on
the traveler.
3.
Observe the LEDs during the scanning procedure.
•
The READY LED turns off and the amber LED (BUSY) turns on.
•
The amber LED (BUSY) remains on while the reader scans and processes the
data.
•
The green LED (OK) turns on, indicating a successful read.
•
The READY LED turns on, indicating that the reader is ready to scan another
document.
The data from the document is sent to the host computer.
Summary of Contents for Full Page Reader
Page 8: ......