DT-01715C
Travel Document Reader User Guide
© 3M 2006 All rights reserved.
7
Setting up the Reader
Before beginning to read documents, you must
•
verify your host PC’s capabilities
•
unpack the reader
•
install the software
•
connect the power supply
•
connect the reader to the host system using the USB cable
Unpacking the Reader
Each reader package consists of:
•
1 reader
•
1 power supply converter
•
1 AC cable
•
1 test card
•
1 Documentation/Software CD
•
1 USB communication cable
•
1 Scotch-Brite™ Microfiber Cleaning Cloth
1.
Remove the contents from the box and separate the components from the packing
material.
2.
Verify that all the parts described have been received. If any parts are missing, contact
3M Global Technical Services (GTS).
For more information, see Appendix D: Customer Service on page 29.
3.
Store the packaging in the event that the reader may require reshipment to 3M for
maintenance.
Note:
Allow the reader to come to room temperature for a minimum two hours
before operation, if it has been stored below room temperature.
Installing the Software
You must have PC Administrative rights to install the software.
Note:
Consult with your IT support representative to confirm the proper installation procedures.
Installing the New Version
1.
Insert the CD supplied with the unit into the CD drive.
Note:
If "Autorun" is enabled, installer.exe will run automatically. If "Autorun" is
not enabled, follow the steps below:
2.
Run the
Installer.exe
application from the CD.
Note:
Do not run
BaseSetup.exe
.
Summary of Contents for Full Page Reader
Page 8: ......