5
Figure 2 - Remove from Pallet
After packages are removed, the base and ladder
assembly must be removed from the pallet.
Remove screws
and nails from the
aluminum stands to
separate the unit from
the pallet.
Place forklift under the
base as shown here.
Cut all strapping. Lift unit slowly to make certain it is
balanced on the forks. Reposition forks if necessary.
After the unit is off the pallet, slowly lower the unit to
the ground. Then, using the forklift, slowly back up while
rotating the unit
fl
at to the ground.
Using a 3/4”
wrench, loosen
all bolts that
secure the three
aluminum stands.
3.0 Ladder System Assembly - Continued
