manualshive.com logo in svg

3M Dynatel 1420-iD, Operator'S Manual

Share
Download
3M Dynatel 1420-iD Operator'S Manual Download Page 26

 26 

78-8130-6741-6 Rev G

15. Locator Specifications: 3M™ Dynatel™ 

Electronic Marking System (EMS) Marker Locator 

1420E-iD

Item

Specification

Frequencies / Markers

Telephone, Power, Gas, Water, Waste Water, 

Communication (CATV), General Purpose

Maximum Writing Range 

3M iD Markers:
 Near-Surface
  Ball Marker
 Full-Range

15 cm (6 in)
30 cm (12 in)
61 cm (24 in)

Maximum Read Range 

3M iD Markers:
 Near-Surface
  Ball Marker

 Full-Range

60 cm (24 in)
1.2 m (48 in) (Telephone, CE Power, Gas, Waste Water, 

Communications (CATV), General Purpose)
1.0 m (40 in) (US Power, Water)
2.0 m (78 in)

Maximum Detection Depth 

3M Passive Markers:
 Near-Surface
  Ball Marker
 Mid-Range
 Full-Range

60 cm (24 in)
1.5 m (60 in)
1.8 m (72 in)
2.4 m (96 in)

Marker Depth Accuracy

+/- 15% +/- 5 cm (2 in)

Dual Marker Locate Mode

Any two markers types

Weight w/batteries

1.8 kg (4 lbs)

Average Battery Life

20 hours*

Regulatory

CE

Environmental Standard

IP54

* 

Note: The battery life is measured at 73ºF / 23ºC, with 5% usage of the backlight 

at normal level and audio at medium level. The ratio of Marker Read operations to 

Marker Locate is assumed to be 1:1.

.

16. Environmental and Regulatory Specifications

Item

Specification

Regulatory

CE

Environmental Standard

IP54

Operating Temperature

-20°C to 50°C (-4°F to 122°F)

Storage Temperature

-20°C to 70°C (-4°F to 158° F)

Summary of Contents for Dynatel 1420-iD





























Reviews:

No comments

Brands by name

Popular brands

Load more brands