manualshive.com logo in svg

3M Dynatel 1420-iD, Operator'S Manual

Share
Download
3M Dynatel 1420-iD Operator'S Manual Download Page 23

78-8130-6741-6 Rev G 

23

When the locator is communicating with a GPS 

device, the LAT and LONG coordinates received from 

the device will appear on the marker locate display.

Step 1.  Locate a marker. (See 

4. D. Single Marker Locate.

)

Step 2.  Press 

Read

 [SK].

The information from the 3M™ iD Marker, as well as the GPS coordinates, will display 

on the locator display. This information is saved automatically in the Read Marker 

History. (

See

 

8.A. Reviewing Marker Read/Write History

.)

If the marker is a passive marker (rather than iD) the locator will display “No iD Marker 

Found”. The GPS coordinates of the attempt to read the non-iD marker are stored in 

the Read Marker History as serial number # 0000-0000-0000. The marker details will 

indicate “not an iD marker”, but will display the GPS coordinates.

C. Sending 3M iD Marker Data to GPS (Capture-Transmit Mode / Mode 2)

Menu [6] + COM Setup [SK:3] + GIS

3M Dynatel™ Electronic Marking System (EMS) Marker Locators that have marker 

locating capability (indicated by ‘iD’ in the model number) can be configured to send 

3M iD Marker data directly to some GPS devices. When an iD marker is located and 

read, the information read from the iD marker, with feature and attribute data, is sent 

to the GPS device and is stamped with latitude, longitude and date/time data. The data 

acquired during this logging process can be uploaded to GIS mapping software. For 

more information and detailed instructions pertaining to specific GPS devices, refer to 

www.3M.com/dynatel for GPS instruction sheet.

10. Help Mode

Menu[6] + >>More [SK:4] + Help [SK:8]

The help screen contains basic information about the locator and its operation. It is 

designed to be a quick reference guide.

• 

Press the double up/down arrows [SK] to navigate between sections.

 

−

The single up/down arrows [SK] will scroll the display line by line.

11. 3M

™

 Dynatel

™

 PC Tool Kit and 

Locator Software Upgrades

Locator software upgrades are periodically released and can be downloaded, free of 

charge, at www.3M.com/dynatel. Located under the Software Updates section, the 

software link is titled 3M Dynatel M-Series Locator PC Tools.  To download the 

software, click on the link and then select 3M Dynatel M-Series Underground Locator 

Summary of Contents for Dynatel 1420-iD





























Reviews:

No comments

Brands by name

Popular brands

Load more brands