3M DX70 - Digital Projector XGA DLP, Product Safety Manual

Page: 7 / 198

© 2007 3M 3M
™
Digital Projector DX70 Product Safety Guide 7
ENGLISH
D
WARNING
To reduce the risk associated with hazardous voltage, impact, tripping,
and intense visible light:
• Do not use this projector around unsupervised children.
To reduce the risk associated with hot surface of lamp cartridge:
• Unplug the projector from the electrical outlet and allow the lamp to cool
for 45 minutes before replacing the lamp.
To reduce the risk associated with a ruptured lamp:
• Always handle the fragile lamp module with care.
• Remove the projector from the ceiling or wall mount before replacing the
lamp.
• Use care when replacing the lamp module in the event of a lamp rupture
- small glass particles and small amounts of mercury may be present.
• Ventilate the area where the lamp rupture occurred.
• Wear safety goggles and gloves when cleaning up ruptured lamp debris.
• Carefully collect the ruptured lamp debris in a closed container and
dispose of the container and the expired lamp module in accordance with
federal, state, and local regulations.
• Wash your hands thoroughly after handling ruptured lamp debris.
• Replace the lamp module when the lamp replacement message appears.
• Never replace the lamp module with a previously used lamp module.
Safety Information