3
• On plastic fittings, never use pipe sealant or pipe dope. Use PTFE thread tape
only,
pipe dope properties
may deteriorate plastic.
• Take care when using pliers or pipe wrenches to tighten plastic fittings, as damage may occur if over
-
tightening occurs.
•
Do not
install in direct sunlight or outdoors.
•
Do not
install near water pipes which will be in path of a drilling tool when selecting the position to
mount the bracket.
• Mount filter in such a position as to prevent it from being struck by other items used in the area of
installation.
• Ensure that the location and fasteners will support the weight of the system when installed.
• Ensure all tubing and fittings are secure and free of leaks.
• Do not install unit if collet is missing. Contact your sales representative if collets are missing from
any fittings.
• The disposable filter cartridge
MUST
be replaced every 12 months, at the rated capacity or sooner if a
noticeable reduction in flow rate occurs.
3M
TM
Water Filtration Products
DWS160-L System Part Number 56272-01
Specifications
Inlet Size: 3/8” NPT Fitting
Outlet Size: 3/8” NPT Fitting
Temperature Range: 40-100°F (4.4-37.8°C)
Pressure Range: 25-125 psi (172-862 kPa)
Dimensions - (16.25”H x 4”D) (41.3 cm x 10.2cm)
Parts Included
Filter Replacement Cartridge-Part Number 56134-44
Fixed Flow Control Head/Bracket Assembly-Part Number 62130-36
Vent Tubing Included in head assembly.
Vent Boss
Figure 1.A
IMPORTANT NOTES
•
Failure to follow instructions will void warranty.
•
Allow a minimum of 3" (7.6 cm) clear space under filter to facilitate cartridge change.
•
Install with the inlet and outlet ports as labeled. Make sure not to reverse connections.
•
Some local codes may require the use of a licensed plumber or certified installer when
disrupting a potable water line.
16 1/4"
4"
6000 Gallons
