13
Remote control
Changing the frequency of remote control signal
The accessory remote control has the two choices on signal frequency
Mode 1:NORMAL and Mode 2:HIGH. If the remote control does not
function properly, attempt to change the signal frequency.
In order to set the Mode, please keep pressing the combination of two
buttons listed below simultaneously for about 3 seconds.
Using as a simple PC mouse & keyboard
The accessory remote control works as a simple mouse and
keyboard of the PC, when the projector's
USB
port (B type)
connects with the PC's USB port (A type) port via a mouse
cable.
(1)
(2)
(1)
(3)
(5)
(2)
(4)
(6)
USB
port
PAGE UP
PAGE
DOWN
VIDEO
MY SOURCE/
DOC.CAMERA
STANDBY/ON
FREEZE
MAGNIFY
ASPECT
SEARCH
AUTO
BLANK
MUTE
VOLUME
KEYSTONE
MY BUTTON
POSITION
ESC
ENTER
MENU
RESET
COMPUTER
PAGE UP
PAGE
DOWN
VIDEO
MY SOURCE/
DOC.CAMERA
STANDBY/ON
FREEZE
MAGNIFY
ASPECT
SEARCH
AUTO
BLANK
MUTE
VOLUME
KEYSTONE
MY BUTTON
POSITION
ESC
ENTER
MENU
RESET
COMPUTER
(1) PAGE UP key:
Press
PAGE UP
button.
(2) PAGE DOWN key:
Press
PAGE DOWN
button.
(3) Mouse left button:
Press
ENTER
button.
(4) Move pointer:
Use the cursor buttons ▲, ▼, ◄ and ►.
(5) ESC key:
Press
ESC
button.
(6) Mouse right button:
Press
RESET
button.
►Improper use of the simple mouse &
keyboard function could damage your equipment. While
using this function, please connect this product only
to a PC. Be sure to check your PC’s manuals before
connecting this product to the PC.
WARNING
• When the simple mouse & keyboard function of this product does not work
correctly, please check the following.
- When a USB cable connects this projector with a PC having a built-in pointing device
(e.g. track ball) like a notebook PC, open BIOS setup menu, then select the external
mouse and disable the built-in pointing device, because the built-in pointing device may
have priority to this function.
- Windows 95 OSR 2.1 or higher is required for this function. And also this function may
not work depending on the PC’s configurations and mouse drivers. This function can
work with the PC which can operate general USB mouse or keyboard.
- You cannot do things like press two buttons at once (for instance, pressing two buttons
at the same time to move the mouse pointer diagonally).
- This function is activated only when the projector is working properly. This function is
not available while the lamp is warming up (the
POWER
indicator blinks green), and
while adjusting the volume and display, correcting for keystone, zooming in on the
screen, using the BLANK function, or displaying the menu screen.
NOTE
(1) Set to Mode 1:NORMAL...
VOLUME -
and
RESET
buttons
(2) Set to Mode 2:HIGH...
MAGNIFY OFF
and
ESC
buttons
Please remember that the REMOTE FREQ. in the SERVICE item of
the OPTION menu (
45
)
of the projector to be controlled should be
set to the same mode as the remote control.
3M™ Digital Projector WX66
© 3M 2008. All Rights Reserved.
