3M Digital Media Systems 800 Series, Operator And Product Safety Manual

Page: 6 / 240

6
Introduction
M
™
Digital Media System 800 Series
© M 2006. All Rights Reserved.
E
N
G
L
IS
H
Safety Information
Please read, understand, and follow all safety information contained in these instructions prior to the use of the
M
™ Digital Media System 800 Series. Retain these instructions for future reference.
Intended Use:
The M ™ Electronic Digital Media System 800 Series was designed, built and tested for use indoors, using M ™
brand lamps, M
™
brand wall mount hardware and nominal local voltages. This projector is not intended for
household use or use by children. The use of other replacement lamps, outdoor operation or different voltages
has not been tested and could damage the projector or peripheral equipment and/or create a potentially unsafe
operating condition.
M
™
Multimedia projectors are designed to operate in a normal office and home environment.
• 16˚ to 29˚C (60˚ to 85˚F)
• 10-80% RH (without condensation)
• 0-1828 m (0-6000 feet) above sea level
The ambient operating environment should be free of airborne smoke, grease, oil and other contaminants that can
affect the operation or performance of the projector.
Use of this product in adverse conditions will void the product warranty.
Explanation of Signal Words and Symbols in Safety Labels and Instructions
WARNING: Indicates a potentially hazardous situation, which if not avoided, could
result in death or serious injury and/or property damage
.
CAUTION:
Indicates a potentially hazardous situation, which if not avoided, may
result in minor or moderate injury and/or property damage.
Warning:
Hazardous Voltage
Warning: Hot Surface – High Temperature Lamp
Attention: Read Accompanying Documentation