1-800-328-1371
www.
3M.com/meetings
5
Note: If you do not have the
eBeam software installed
on your computer, you can
install it from the 3M Digital
WallDisplay CD-ROM.
1. Connect the VGA cable
➊
from the VGA/Monitor port
on the computer to the VGA
on the Digital WallDisplay.
2. Connect the serial cable
➋
from the serial/COM port
on the computer to the
Computer on the Digital
WallDisplay.
3. Connect the PC Audio
cable
➌
from the
Headphones jack on the
computer to the PC Audio on
the Digital WallDisplay.
4. Press the On/Off button
➍
on the Digital WallDisplay to
turn on the lamp.
Note: If you are using a
laptop, toggle the display
function by using one of
the following methods:
Fn +
or
Fn + LCD/CRT.
5. Double-Click the eBeam
desktop icon on your
computer
➎
to launch the
whiteboard software.
6. Click the Calibrate button
➏
in the 3M Digital WallDisplay
calibrate dialog box.
7. Tap each of the highlighted
targets
➐
with the interactive
stylus.
8. Use the eBeam annotation
tools
➑
to annotate your
presentation.
computer & interactive stylus
�������
��������
��
�����
���
�����
������
�����
������
������������
������� ���
���
�����
�����
���
�
�
�
�����
�� �
�
�
�
�
�
�
➊
➋
➌
9200IW • 9200IC
