background image

Read, understand, and follow all safety information contained in these instructions prior to installation and use of the 3M

 

Water Filtration Products Dual Inlet Dual Flow Manifold System DIDF260-CL. Retain these instructions for future reference.
Intended use:

The Dual Inlet Dual Flow Manifold System DIDF260-CL is intended for use in filtering potable water for foodservice equipment and has not 
been evaluated for other uses. The system is installed indoors, and must be installed by a qualified professional installer according to these 
installation instructions.

 

 

SAFETY INFORMATION

EXPLANATION OF SIGNAL WORD CONSEQUENCES

WARNING

Indicates a potentially hazardous situation, which, if not avoided, could result in 
death or serious injury and/or property damage.

CAUTION

Indicates a potentially hazardous situation which, if not avoided, may result in 
minor or moderate injury and/or property damage.

 CAUTION

Indicates a potentially hazardous situation, which, if not avoided, may result in 
property damage.

WARNING

To reduce the risk associated with the ingestion of contaminants:

• 

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.

 

Systems certified for cyst reduction may be used on disinfected water that may contain filterable cysts. EPA Establishment #070595-CT-001

To reduce the risk associated with choking:

• 

Do not

 allow children under 3 years of age to have access to small parts during the installation of this product.

To reduce the risk associated with hazardous voltage due to an installer drilling through existing electric or water pipes in the area of installation:

• 

Do not 

install near electric wiring or piping which may be in path of a drilling tool when selecting the position to mount the system bracket.

To reduce the risk of physical injury:

•  Depressurize system as shown in manual prior to cartridge removal.

To reduce the risk associated with back strain: 

•  Follow safe lifting procedures.

1

Summary of Contents for DIDF260-CL













Reviews: