background image

Chapter 1  Getting Started With Your CRT Desktop Monitor 

19 

Configuring the Display Settings 

After you connect your CRT desktop touch monitor and turn on 
your computer, the Add New Hardware Wizard should appear 
because this monitor is a plug and play device. 

1.  Choose the "Display a list of drivers..." option. 
2.  Then click on the "Have Disk" option. 
3.  Insert the Monitor Installation Disk (included with this monitor) and 

select the appropriate monitor from the list. 

4.  Click "Next" and the proper preset timing files will be installed for 

your monitor. 

You may need to configure one or more of these display settings.  
The ideal settings for the 15

” 

and 17

” 

monitors are as follows: 

• 

Display mode (also called desktop area or video resolution) 1024 x 768 

• 

Refresh rate (also called vertical scan rate or vertical sync) 85 Hz 

• 

Color depth (also called color palette or number of colors) at least 16-
bit (high color) 

Table 2.  Operating Ranges 

Display Size  Horizontal  

Vertical 

15 inch 

30 to 70 kHz 

50 to 100 Hz 

17 inch 

30 to 70 kHz 

50 to 150 Hz 

Using the Standard Controls for the Video Card 

In addition to the standard controls on the monitor, each video card 
has several controls that let you adjust the display settings.  The 
software and driver for each video card is unique.  In most cases, 
you adjust these settings by using a program or utility provided by 
the manufacturer of the video card. 

Summary of Contents for CRT Touch Monitor































Reviews: