3M Clean-Trace NGi Luminometer User Manual Download Page 40 | Manualshive

Page: 40 / 42

background image

11.0 Appendices

11.01 Technical Specifications
11.02 Terms and Conventions

11.01 Technical Specifications

User interface

• Simple structured menu system
• Buttons & menu driven LCD user interface
• 7 button user interface - UP, DOWN, LEFT, RIGHT, POWER and 2 software defined keys
• Tactile silicon rubber keypad
• Interface & software will allow user to enter text quickly.

Display

• Graphical LCD panel with 240x160 pixels
• Automatic contrast control - to compensate for temperature variations which affect the display contrast
• Backlight with timed ON/OFF options in the software
• Scroll up/down control for long list items
• Automatically scalable scroll bars to indicate size and position of list as in Microsoft® Windows applications.
• Date and time displayed when not in sleep mode and measuring

Ergonomics

• Left or right hand operation
• Screen readable in hand held position or desk top position
• Fully portable hand held, desk top, belt or shoulder carry pouch or docking station options available for maximum

user flexibility.

Sample Chamber

• Prevent measure while cap opened

Charging

• Removable sealed battery pack
• Rapid charge
• Power connector on instrument and optional docking station for charger lead.
• The instrument will automatically detect when the charger is plugged in.
• Display icon shows remaining battery life.

Intelligent Diagnostics

• Built in fault and status diagnostic
• Out of calibration
• Backgrounds too high
• Built in calibration check technology

«
...
38
39
40
41
42
»

Summary of Contents for Clean-Trace NGi Luminometer











































Reviews:

No comments

Related manuals for Clean-Trace NGi Luminometer

Brand: Callaway Pages: 13

Brand: Hammond Organ Pages: 25

Brand: Hammond Organ Pages: 87

Brand: Waterproof Pages: 10

Brand: Ocean Optics Pages: 43

Brand: Ocean Technology Systems Pages: 12

Brand: Ocean Reef Pages: 24

Brand: VELOCICALC Pages: 10

Brand: Kawai Pages: 8

Brand: Energic Plus Pages: 12

Brand: Ecolab Pages: 95

Brand: DeltaOHM Pages: 26

Brand: King Instrument Pages: 5

Brand: Sonel Pages: 26

Brand: Deprag Pages: 28

Brand: Camlab Pages: 28

Brand: CryptOn Pages: 13

BlueForce Smart

Brand: CAME Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands