SECTION 2: INSTALLATION
Proper installation sequence of water conditioning equipment is very important. Refer to the following diagram for your particular water supply. Failure to follow installation,
operation, and maintenance instructions may result in property damage due to leakage and will void warranty.
BRINE
TANK
SOFTENER
PRE-FILTER
(OPTIONAL)
SOFT WATER
TANK
SWITCH
PRESSURE
PRESSURE
WELL
WATER
RAW
FILTERED WATER
FILTERED
TYPICAL WELL INSTALLATION
CHECK VALVE
BRINE
TANK
SOFTENER
PRE-FILTER
(OPTIONAL)
SOFT WATER
INCOMING
WATER
FILTERED WATER
FILTERED
PUBLIC WATER INSTALLATION
CHECK VALVE
W
ASTE DRAIN
W
ASTE DRAIN
CAUTION
To reduce the risk associated with property damage due to water leakage:
•
Read and follow
Use instructions before installation and use of this water treatment system.
• Installation and use
MUST
comply with existing state or local plumbing codes.
To reduce the risk associated with property damage due to plugged water lines:
• Pay particular attention to correct orientation of control valve. Water fl ow should match arrow on control valve. The Inlet and Outlet of other water treatment
equipment products will vary depending on the control valve brand used.
Figure 1
2-1
