10
78-8126-9537-3-B
5.6 Wrap two half-lapped layers of highly-tensioned Scotch® Vinyl Electrical Tape Super 88 over the hi-K mastic,
leaving approximately 0.125" (3 mm) of mastic exposed at each end. Taper the exposed edges of the hi-K
mastic onto the cable by gently pressing along the edge with your finger. (
Figure 14
)
6INYL
4APE
MM
MM
4APER%DGEOF
(I+-ASTIC
4APER%DGEOF
(I+-ASTIC
3TRESS#ONTROL
!SSEMBLY4UBE
#ABLE)NSULATION
Figure 14
5.7 Select one or more of the 2" x 11" (50 mm x 280 mm) hi-K mastic strips from the kit. Remove the liner and
fold the mastic strip twice lengthwise to form a 0.5" (12 mm) wide strip. (
Figure 15
)
(I+-ASTIC
-ASTIC&OLDED
/VER4WICE
2EMOVE,INER
Figure 15
5.8 Wrap the mastic strip around the exposed conductor between the cable insulation and lug. Build the mastic up
to the insulation O.D. (
Figure 16
)
$OUBLED/VER
(I+-ASTIC
Figure 16
