78-8117-0508-2 Rev D
15
13.4 Select second Scotch
®
Mastic Strip 2230 from kit and remove white release liners. Apply a second
SINGLE
WRAP
of mastic over solder block on ground braid and previously applied mastic (
Figure 21
).
Cut off excess.
Shield Wires
Constant Force Spring
Ground Braid
1
ST
Scotch® Mastic Strip 2230
Solder Block
2
ND
Scotch® Mastic Strip 2230
Ground Braid Leg
Trim
Cable
Wire
Shield
Figure 21
13.5 Wrap two highly stretched half-lapped layers of electrical grade vinyl tape around mastic seal, constant force
spring and exposed shield wires (
Figure 22
).
NOTE: Take care not to cover exposed semi-con insulation shield. A minimum of 3/4" (19 mm) must be exposed.
Semi-Con
Constant Force Spring
Two Half-Lapped Layers of Electrical Grade Vinyl Tape
Shield Wires
Scotch® Mastic Strip 2230
Vinyl Tape Marker
1" (25 mm)
Figure 22
