10
78-8096-4635-5-C
9.0 Install Cold Shrink Insulator
9.1 Install Cold Shrink Insulator by sliding it over the Lug Cover with the loose core end tab at terminal end. Align
the end of the Cold Shrink Insulator so it covers the vinyl tape on the feeder cable. Remove core by unwinding
counter-clockwise (Figure 15).
TIP: An occasional tug will aid in the removal of the core.
NOTE: When starting to remove core, observe to make sure end of Cold Shrink remains lined up over the vinyl
tape
(
Figure 15
).
Lug Cover
Cold Shrink Insulator
Counter-Clockwise
Figure 15
