3M Instruction Guide: 3M
TM
Locator Plate 3443-81-XX, 3D-Printed
P a g e
5 | 8
5.0
Procedures for Cable Termination
After the cable is prepared it is ready for termination.
5.1
Place the socket connector onto the cover over the cable, verifying the pin 1
indicator is in the correct position. (See Figure 8)
Figure 8
5.2
Bring the handle of the press down until the IDC’s press into cable and the
connector fully seats into the cover. (See figure 9)
Figure 9
5.3
Visually inspect termination to ensure that:
a.
Cover is fully seated and parallel to the body.
b.
Cable is properly aligned with the cover.
c.
Cover retaining devices on the body are flush with the cover end.
(See Figure 10)
