3M 3M-Matic Accuglide NPH 11200, Instructions And Parts List

Page: 19 / 52

11
Operation
(continued)
Manually turn tape roll to create slack tape while
pulling tape through tape applying mechanism until
needle is through and tape is in alignment with
applying roller.
Excess tape can be cut with a scissors at applying
roller.
Figure 3-4
Place tape roll on tape drum to dispense tape with
adhesive side forward. Seat tape roll fully against
back
fl ange of drum. Adhere tape lead end to tape
as shown.
Figure 3-4 Tape Loading
Figure 3-5 Tape Loading
•
To reduce the risk associated with
sharp blade hazards:
-
Keep hands and fi ngers away from tape
cutoff blades under Yellow blade guards.
The blades are extremely sharp.
NPH 2" - NA
2014 December
WARNING