3M 3M-Matic AccuGlide 2+ 800af, Instructions And Parts List

Page: 43 / 106

33
Figure 11-12 – Box Size Set-Up
Figure 11-11 – Box Size Set-Up
Flap
Folding
Guides
Figure 11-11
Run several test boxes through the machine, and
observe the
fl ap kicking action. Adjust the kicker
cam so the kicker "kicks" earlier or later as required
(refer to fi gure 11-11).
In general, it is better to set
the kicker to "kick" early because it contacts the fl ap
higher above the score-line which results in more
reliable
fl ap folding.
Figure 11-12
The upper side fl ap folding guides can be adjusted
in or out to accommodate the width of the box. For
optimum performance, the side
fl ap folding guides
should be adjusted to the narrowest position which
allows them to catch any side
fl aps that may be bent
outward past vertical.
Note –
Box fl aps should not be bent outward
past vertical more than 15° when
entering case sealer.
2010 December
800af-I-NA
11 - OPERATION
(continued)
•
To reduce the risk associated with
impact hazards:
− Always use appropriate supporting
means when working under the upper
drive assembly
WARNING
Top View
(Infeed End)