3M 3M-Matic 800r, Instructions And Parts List, Page: 40 / 72

35
Parts and Service Information
Spare Parts
The following parts periodically require replacement due to normal wear. They should be ordered immediately
and kept on hand to keep the case sealer in production.
Qty. Section/Ref. No. Part Number Description
1
II
/2880-15 78-8057-6179-4 Roller – Applying
1 II /2881-5, 2886-5 78-8057-6178-6 Roller – Buffing
1
II
/2881-10 78-8070-1274-1 * Spring – Upper Extension (Silver)
1 II /2883-2 78-8017-9173-8 * Knife – 65 mm/2.56 Inch
1
II
/2883-18 78-8113-7030-9 Spring – Torsion
2 II /2883-12 78-8052-6602-6 * Spring – Cutter
1
II
/2886-10 78-8070-1273-3 * Spring – Lower Extension (Black)
4 I /4894-42 78-8094-6447-8 Belt – Drive
* Note – These spare parts are supplied with the tool kit that comes with your machine and should also be
ordered separately as used, to keep the case sealer in production.
Parts Ordering/Service
Refer to the first page of this instruction manual for parts ordering or service information.
Tool Kit
A tool kit, P/N 78-8060-8476-6, packaged separately and included with your machine, contains the necessary
wrenches for use with the metric fasteners on the case sealer. The threading tool, part number 78-8076-4726-4,
contained in the kit is available as a stock replacement item and can be ordered separately.
Labels
In the event that any labels are damaged or destroyed, they must be replaced to ensure operator safety. For
safety and information replacement labels, see Parts Illustration/Lists, Section
I
, pages 68-69.