3M 3M-Matic 700rks, Instructions And Parts

Page: 26 / 72

21
Operation
(Continued)
Figure 3-10 Once the box is pushed under the
upper frame, the upper frame raising switch is
released, allowing the upper frame (drive belts/
taping head) to descend on the box. The drive
belts convey the box through the upper and lower
taping heads for application of the tape seals.
Note – downforce of the upper frame is adjusted
with "Top Drive Assembly Force Adjust" air
regulator.
As the box is conveyed through the machine, the
centering switch is released, causing the
centering guides to return to their full open
position.
Once the box is conveyed from under the upper
taping head, the upper frame descends to its rest
position, ready for insertion of the next box
5. Turn electrical and air supplies "Off" when
machine is not in use.
6. Reload and thread tape as necessary.
7. Be sure machine is cleaned and lubricated
according to recommendations in "Maintenance"
section of this manual.
Notes –
1. Machine or taping head adjustments are
described in the "Adjustment" Section of this
manual.
2. Box drive motors are designed to run at a
moderate temperature of 40°C [104°F]. In
some cases, they may feel hot to the touch.
Figure 3-10 – Applying Tape Seals