3M 3M-Matic 7000a Pro, Instructions And Parts List, Page: 90 / 176

NA - ENG
April 2017
3M-Matic ™ Accuglide 3 - 2 Inch Taping Head
Page 6
(Speci cations continued on next page.)
Speci cations
1. Tape:
For use with Scotch ® pressure-sensitive lm box sealing tapes.
2. Tape Width:
36mm or 1-1/2 inches minimum to 48mm [2 inches] maximum.
3. Tape Roll Diameter:
Up to 405mm [16 inches] maximum on a 76.2mm [3 inch] diameter core.
(Accommodates all system roll lengths of Scotch ® lm tapes.)
4. Tape Application Leg Length - Standard:
70mm ± 6mm [2-3/4 inches ±1/4 inch]
Tape Application Leg Length - Optional:
50mm ± 6mm [2 inches ± 1/4 inch] (See “Adjustments – Tape Leg Length.”)
5. Box Size Capacities:
For use with center seam regular slotted containers.
When upper and lower taping heads are used on
“3M-Matic”
case sealers, refer to the
respective instruction manual speci cations for box weight and size capacities.
6. Operating Rate:
Conveyor speeds up to 0.5 m/s [100 feet per minute].
7. Operating Conditions:
Use in dry, relatively clean environments at 5° to 40°C [40° to 105°F] with clean dry boxes.
Important –
Taping heads should not be washed down or subjected to conditions causing
moisture condensation on components.
8. Taping Head Dimensions:
Length – 442mm [17 3/8 inches]
Height – 648mm [25 1/2 inches] (with tape drum)
Width – 105mm [4-1/8 inches] (without mounting spacers)
Weight – Packaged: 8.6kg [19 lbs.] Unpackaged: 7.7kg [17 lbs.]