3M 3M-Matic 7000a Pro, Instructions And Parts List

Page: 39 / 176

NA - ENG
March 2017
3M-Matic ™ 7000a-7000a3 Pro
Page 27
11.5 Special Set-Up Procedure for Outer Column Re-Positioning ( continued )
4. Turn the height adjustment crank clockwise to raise the outer columns until
they reach the stop.
Note:
Instructions are indicated for the Standard Column Position (Also see speci cations).
If Alternate Column positions are needed, loosen and re-position the column stop.
5. Tighten the eight (8) screws and washers in each column. Also tighten two (2) Set
Screws (if applicable). Crank upper taping head assembly up and remove blocks.
Moving the outer columns will increase or decrease the box height handled by the
7000a-7000a3 Pro case sealer.
Maximum Height:
An additional adjustment can be made to reach Maximum Height. This additional height
adjustment can be made by moving the Upper Assembly Crossbar up to the top holes -
(Figure 11-8).
Figure 11-8
11. Set-Up and Adjustments
(continued)