International - ENG
February 2021
3M-Matic
™
7000a-I / 7000a3-I Pro - Type 11700 Original Instruction
Page 9
Source Document for all related Manuals/Translations
44-0009-2164-1 / ECO# 0078045
3. Safety
(continued)
3.11 Operator’s Skill Levels Required to Perform the Main Operations on the Machine
The Table shows the minimum operator’s skill for each machine operation.
Important!
The factory manager must ensure that the operator has been properly
trained on all the machine functions before starting work.
Skill 1: Machine Operator
This operator is trained to use the machine with the machine controls, to feed cases into
the machine, make adjustments for different case sizes, to change the tape and to start,
stop and restart production.
Skill 2: Mechanical Maintenance Technician
This operator is trained to use the machine as the MACHINE OPERATOR and
in addition is able to:
• Work with the safety protection disconnected
• Check and adjust mechanical parts
• Carry out machine maintenance operations/repairs
He is not allowed to work on live electrical components
Skill 2a: Electrical Maintenance Technician
This operator is trained to use the machine as the MACHINE OPERATOR and
in addition is able to:
• Work with the safety protection disconnected
• Check and adjust mechanical parts
• Carry out machine maintenance operations / repairs / adjustments / repair electrical
components
He is allowed to work on live electrical panels, connector blocks, control equipment, etc.
Skill 3: Specialist from the Manufacturer
Skilled operator sent by the manufacturer or its agent to perform complex repairs or
modifications (on agreement with the customer).
Operator’s Skill Levels Required to Perform the Main Operations on Machine
Operation
Machine Status
Required
Operator Skill
Number of
Operators
Machine installation and setup
Running with safety
protections disabled
2 and 2a
2
Extraordinary mechanical maintenance
3
1
Extraordinary electrical maintenance
2a
1
Adjusting box size
Stopped by pressing
the EMERGENCY STOP
button
1
1
Tape replacement
1
1
Blade replacement
Electric power
disconnected
2
1
Drive belt replacement
2
1
Ordinary maintenance
2
1
