3M 3M-Matic 120af3, Instructions And Parts List

Page: 45 / 80

40
Replacement Parts And Service Information
Replacement Parts Ordering Information and Service
Refer to the first page of this instruction manual "Replacement Parts and Service Information".
Tool Kit
A tool kit, part number 78-8060-8476-6, is supplied with the machine. The kit contains the necessary open end
and hex socket wrenches for use with the metric fasteners on the case sealer. The threading tool, part number
78-8076-4726-4, contained in above kit is also available as a replacement stock item.
Label Kit
In the event that any labels are damaged or destroyed, they must be replaced to ensure operator safety. A
label kit, part number 78-8113-6779-2 is available as a stock item. It contains all the safety labels used on the
120af3 Adjustable Case Sealer. Labels can also be purchased separately. See Parts Drawing/List,
pages 74 and 75.
Spare Parts
The following parts are normal wear items and should be ordered and kept on hand as used.
Qty. Ref. No. Part Number Description
2 6233-59 (Sec. I ) 78-8100-0859-5 Belt – Drive W/Pin
In addition, a tool/spare parts kit supplied with the 120af3 Adjustable Case Sealer contains the following spare
parts:
Qty. Ref. No. Part Number Description
1 2950-10 (Sec. II ) 78-8070-1274-1 Spring – Upper Extension (Silver)
1 2955-10 (Sec.
II
) 78-8070-1273-3 Spring – Lower Extension (Black)
2 2952-2 (Sec. II ) 78-8028-7899-7 Knife – 89 mm/3.5 Inch
4 2952-12 (Sec.
II
) 78-8052-6602-6 Spring – Cutter
All the above listed parts can be ordered separately and when used should be ordered and kept on hand for
spares.
Also see Section II , page 17 for recommended taping head spare parts.