![background image](http://html.mh-extra.com/html/3m/29800/29800_instructions-and-parts-list_3044604018.webp)
14
Operation
(Continued)
Automatic Operating Procedure
(Bottom Taping Only)
1.
Raise case sealer upper taping head to
maximum height (if applicable).
2.
Turn case former air valve "On" (SUP).
3.
Turn Manual/Auto valve to "Auto".
4.
Place open box with front and back bottom flaps
folded in, onto the case former center rail.
5.
Move box forward (toward case sealer) until
both side bottom flaps contact the bottom flap
actuator plates. The two bed plates will then
rotate up and fold the side box flaps up.
The box ejector will automatically push the box
into the case sealer and then return to the rest
position ready for the next box.
Summary of Contents for 29800
