background image

Requester: 

 

Michelle Dumas 

Creator:

  

deZinnia.2

File Name: 

 34870877577.indd

Structure #: 

 NA

Date: 

 10/28/11

Printed Colors – Front:

Printed Colors – Back:

Match Colors:

 

This artwork has been created as requested by 3M. 
3M is responsible for the artwork AS APPROVED and 
assumes full responsibility for its correctness.

Summary of Contents for 28392

Page 1: ...ir source before servicing inspecting maintaining cleaning and before changing abrasive product Prior to use inspect abrasive product and accessories for possible damage If damaged replace with new abrasive product and accessories available from 3M Only use accessories supplied or recommended by 3M Never allow this tool to be used by children or other untrained people Do not leave an unattended to...

Page 2: ...culate the oil If the tool is used frequently lubricate it on a daily basis or lubricate it if the tool starts to slow or lose power It is recommended that the air pressure at the tool be 6 2 bar 90 psig while the tool is running so the maximum RPM is not exceeded The tool can be run at lower pressures but should never be run higher than 6 2 bar 90 psig If run at lower pressure the performance of ...

Page 3: ...t the phenolic washer is in place around the threaded shaft of the new disc pad 5 Secure the buffer spindle with the wrench and tighten the new disc pad securely to the tool WARNING An inadequately tightened disc pad could cause the threaded shaft to break causing damage to the tool and work piece and possible injury to the operator or bystanders Mounting rubber tool hanger accessory onto buffer 1...

Page 4: ... Name 34870877577 indd Structure NA Date 10 28 11 Printed Colors Front Printed Colors Back Match Colors This artwork has been created as requested by 3M 3M is responsible for the artwork AS APPROVED and assumes full responsibility for its correctness ...

Reviews: