3M 2529-AS Instructions Manual Download Page 12

Page: 12 / 12

3M and Fibrlok are trademarks of 3M Company.

Important Notice

All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not
guaranteed.

Before using this product, you must evaluate it and determine if it is suitable for your intended application.

You assume all risks and liability associated with such

use.

Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no

force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.

Warranty; Limited Remedy; Limited Liability.

This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase.

3M MAKES NO OTHER WARRANTIES INCLUDING,

BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

If this product is defective within the warranty

period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product.

Except where

prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the
legal theory asserted.

Communication Markets Division

3M Telecommunications

6801 River Place Blvd.

Austin, TX 78726-9000

1-800-426-8688

www.3MTelecommunications.com

Please Recycle. Printed in USA.

78-8140-1580-2-C

™

Fibrlok

™

Splices, Kit and Tool Descriptions

Product Number

Description

Packaging

2529-AS

Fibrlok

™

II Angle Fiber Splice

60/package

2540-AS

Fibrlok

™

250 µm Angle Fiber Splice

60/package

2501-AS

Fibrlok

™

Angle Splice Assembly Tool

1/package

2565

Fiber Optic Angle Cleave Kit

1/package

2535

Fiber Optic Angle Cleaver

1/package

™

Fiber Optic Angle Cleave 2565 Kit Contents

Product Number

Description

2535

Fiber Optic Angle Cleaver with brush, tweezers, maintenance tools and spare rubber pads

2501-AS

Fibrlok

™

Angle Splice Assembly Tool

8865-AT

No Polish Connector Assembly Tool

6365-ST

Fiber Stripping Tool

6365-KS

Kevlar Snips
Lint-Free Cloths, Cleaning Alcohol Bottle, Work Plate, Fiber Shard Container

8800-APC/AS

No Polish Connector SM SC/APC Angle Splice, 250/900 µm (2 ea.)

2529-AS

Fibrlok

™

II Angle Fiber Splice (6 ea.)

2540-AS

Fibrlok

™

250 µm Angle Fiber Splice (5 ea.)

Summary of Contents for 2529-AS













Search results

Summary of Contents for 2529-AS

Reviews:

Related manuals for 2529-AS

Brands by name

Popular brands

3M 2529-AS, Instructions Manual

Search results

Summary of Contents for 2529-AS

Reviews:

Related manuals for 2529-AS

Brands by name

Popular brands