22
3M™ MicroTouch™ Display M1500SS User Guide
3M Touch Systems, Inc. Proprietary Information
Installing Touch Software
A MicroTouch™ MT 7 driver is required to operate your M1500SS Display. To enhance
your touch experience, refer to the
MT7 Software User Guide
for complete instructions.
These drivers and relevant technical documentation can be found on the enclosed 3M
Touch Solutions CD (31197) and are also available for download from our website at
www.3m.com/touch
. After the software is installed, restart your computer to load and
activate the touch sensor driver.
The Touch Solutions CD includes the touch sensor driver and control panel that enable
your touch sensor to work with your computer. When you install the CD included with
your display, MT7 Software will be automatically loaded on your system. MT7 software
provides touch sensor drivers for Windows Vista, Windows XP, and Windows 2000.
For older systems, software is provided on the CD – select the Browse CD option to
enable you to load legacy touch software for Windows NT 4.0, Windows 95 or 98, or
Windows Me. Because these are legacy systems, make sure to install the TouchWare
software before connecting the USB touch sensor cable to your system.
To complete the setup of your touch display, make sure you calibrate the touch sensor.