Ver 1.0.0.3
Since 1988
3
4. Software Connection Settings
Refer to the following sections to set up the HSPA FWT WiFi AP. Before the setup, please
confirm that the LAN port of the AP has been connected with the PC via RJ-45:
y
Set up 3G Settings for the HSPA FWT WiFi AP
1. Please connect your computer to the HSPA FWT WiFi AP’s LAN port.
2. Initiate your Internet Explorer, and type in the address “10.10.10.254”
3. Please
input
“admin”
as the user name and the password. Click
OK
button to enter
AP’s setup page.
4. Once you are in the setup page, please select “
Internet Settings
” and enter “
WAN
”
section of the setup.
5. In 2G/3G ISP SETTINGS, please contact your ISP for the dialup settings. User must
enter
Access Point Name (APN)
,
Dial Number
,
Username
and
Password
. Besides,
you must enter PIN code if you had set up before for the SIM card.
Please ask your ISP for
required information