http://www.3jtech.com.tw
http://www.pnpipcameras.com
FWT WIFI AP_USB x 4 User’s Guide
Copyright of 3JTech Co., Ltd. (also doing business as A3J Engineering Inc.)
47
Information Table:
This table will show all information about the SIM card used in your FWT
Wifi AP_USB x 4. For more details, please refer to the following parameters below:
SIM Card Status:
It includes “SIM not inserted”, “READY”, “SIM PIN”, “SIM PUK”,
“ERROR” five statuses.
‐
SIM not inserted:
It stands that the SIM card has not been inserted into the router
yet.
‐
READY:
It stands that the SIM card works normally.
‐
SIM PIN:
It stands that the user needs to input the correct PIN code due to the
wrong PIN code value of system.
‐
SIM PUK:
It stands that the SIM card has already been locked. The user needs to
request ISP and input the correct PUK to unlock the SIM card.
‐
ERROR:
This message will be shown if the system fails to detect the information of
the SIM card.
Remaining attempts to enter PIN:
It shows the remaining times that you are allowed to
input the PIN code for the SIM card inserted into the router. Once the times exceeds 3
times, the SIM card will be locked.
Remaining attempts to enter PUK:
It shows the remaining times that you are allowed to
input the PUK for the SIM card inserted into the router. Once the times exceeds 10 times,
the SIM card will be useless.
Automatic PIN CODE insertion on boot:
Decide that whether to use the value filled in
the field of
Type the PIN CODE for automatic insertion
to do the authentication of SIM
card or not while the router is powered on. To enable it, please click on the checkbox in
front of this function.
Enable PIN request for initialization:
Enable/Disable the PIN code function. In case this
function is enabled and your SIM card has the PIN code setup, you must input the correct pin
code and press the
Apply
button for the authentication. Three successively incorrect input of
Pin Code will make the SIM card locked.
Enter PIN:
In case the field of SIM Card Status in the Information Table is at the “SIM PIN”
status, you should enter the correct PIN code in the
PIN
field of this function and press the
Apply
button for authentication. The system will return the message in the pop-up window for
you to realize whether your setting is successful or not.
