2
Assembly
instructions
Assembly instruction
Step 1
Place your HP monitor securely on a soft surface.
Now remove the base of your HP monitor if it is attached.
Step 2
Now plug the VESA adapter onto the monitor. Here, the two
pins (yellow) must connect with the adapter.
Figure
Step 3
Please make sure that the adapter is plugged in the correct
direction. You can see this by aligning all holes of the
adapter with the holes in the monitor (green).
Figure
Step 4
Now fasten the VESA adapter with the included 4x
(M4x16)
screws
.
ATTENTION:
Use screw package
A
!
Figure
