3idee ass-mxaq Assembly Instructions Download Page 3

Page: 3 / 4

Assembly

instructions

Step 3

Now screw the screw + spring washer into the rear
monitor base from below. (Figure 3)

Please pay attention to the correct order of the

washers. This is important for the permanent safety
of the assembly.

Figure 3

Step 4

Now the m VESA adapter can be screwed to your
VESA arm. (Figure 4)

Please use the 4 screws included in the scope of delivery.

Figure 4

Step 5

Finally, please check again whether all screws have been
tightened correctly.

However, please keep in mind that this is a plastic part.

Figure

Summary of Contents for ass-mxaq

Page 1: ...Asus asus com Designo MX27AQ Designo MX279HS Designo MX27UCS The VESA adapter allows you to conveniently mount your ASUS brand monitor to a monitor arm with a VESA hole pattern 75 x 75mm Use the included screws and nuts If you want to mount your VESA adapter directly to the wall use suitable screws and dowels not included ...

Page 2: ...he monitor base Figure 1 Please make sure you have a soft surface when you store the monitor for disassembly assembly Figure 1 Step 2 Now slide the 3idee VESA adapter onto the foot from behind as shown Figure 2 It is important that the hole in the VESA adapter is aligned with the hole in the monitor base follows in step 3 Figure 2 ...

Page 3: ...e washers This is important for the permanent safety of the assembly Figure 3 Step 4 Now the monitor VESA adapter can be screwed to your VESA arm Figure 4 Please use the 4 screws included in the scope of delivery Figure 4 Step 5 Finally please check again whether all screws have been tightened correctly However please keep in mind that this is a plastic part Figure ...