3idee ass-mxaq Assembly Instructions Download Page 1

Page: 1 / 4

www.3idee.eu

ass-mxaq VESA Adapter

Assembly

instructions

The VESA adapter is compatible with the following products from
Asus(asus.com):

Designo MX27AQ, Designo MX279HS, Designo MX27UCS

The VESA adapter allows you to conveniently mount your ASUS brand monitor to a
monitor arm with a VESA hole pattern (

75 x 75mm

). Use the included screws and

nuts.

If you want to mount your VESA adapter directly to the wall, use suitable screws
and dowels (

not included

Summary of Contents for ass-mxaq

Page 1: ...Asus asus com Designo MX27AQ Designo MX279HS Designo MX27UCS The VESA adapter allows you to conveniently mount your ASUS brand monitor to a monitor arm with a VESA hole pattern 75 x 75mm Use the included screws and nuts If you want to mount your VESA adapter directly to the wall use suitable screws and dowels not included ...

Page 2: ...he monitor base Figure 1 Please make sure you have a soft surface when you store the monitor for disassembly assembly Figure 1 Step 2 Now slide the 3idee VESA adapter onto the foot from behind as shown Figure 2 It is important that the hole in the VESA adapter is aligned with the hole in the monitor base follows in step 3 Figure 2 ...

Page 3: ...e washers This is important for the permanent safety of the assembly Figure 3 Step 4 Now the monitor VESA adapter can be screwed to your VESA arm Figure 4 Please use the 4 screws included in the scope of delivery Figure 4 Step 5 Finally please check again whether all screws have been tightened correctly However please keep in mind that this is a plastic part Figure ...