7
Assembly
instructions
Step 3
Figure 3
Now screw the screw + spring washer into the rear
monitor base from below. (Figure 3)
Please pay attention to the correct order of the
washers. This is important for the permanent safety
of the assembly.
Step 4
Figure 4
For this step we recommend a
2nd person
.
Now lift the monitor and hold it to your monitor mount.
Fasten the VESA adapter with the 4 included M4x14 screws
(screw bag: SP2)
.
It is best to fasten 2 screws diagonally first, so that the
monitor cannot fall down and you can fasten the remaining
screws without any effort.
ATTENTION:
Pay attention to the right screws!
(Figure 4)
Step 5
Finally, please check again whether all screws have been
tightened correctly.
However, please keep in mind that this is a plastic part.
