English
to 1 minute, it may need to be recharged. To charge, plug the DermLite Lens (DL) into any USB
port. While charging, the Charge Indicator (CI) will glow red; when fully charged, it will appear
green.
Troubleshooting
Please check our website (www.dermlite.com) for the most current troubleshooting informa-
tion. If your product requires servicing, please go to the “Service & Support” pages at www.
dermlite.com, where you can complete a “Repair Request” form. Or, contact your local 3Gen
dealer.
No Light
Fully recharge the battery and check again. If the condition persists, your product may require
servicing.
LED Fails
The LEDs used in your product are designed to last over 100,000 hours. If any one of the LEDs
fails, your product requires servicing.
Mechanical Malfunction
Please contact 3Gen to arrange for service.
Care and Maintenance
Your product is designed for trouble-free operation. There are no adjustments to be made nor
is any special servicing required. Never attempt to open the device for any reason other than
battery replacement.
Cleaning and Sterilization
The exterior of your product may be cleaned or disinfected by wiping it with isopropyl alcohol
(70% vol.). Do not use alcohol or disinfectants in the optical areas of the unit. Do not use abra-
sive material on any part of the equipment or immerse the device in liquid. Do not autoclave.
Cleaning
The DermLite lens should be treated as high quality photographic equipment and should be
cleaned with standard lens cleaning equipment and protected from harmful chemicals.
Components include:
DermLite Lens unit, iPhone adapter, Universal Mount.
Warranty
2 years for parts and labor.
Serial number is engraved into the USB plug.
