Installation
2
Attach Baseplate to Floor
Using a mortar bit for 3/16" fastener and hammer drill
(or 11/64" drill bit for wood), pre-drill holes into the floor.
a
Hole
Depth
Hole Depth = Screw 1/2"
A1-B
B2-B
B1-B
A2-B
C1-B
D1-B
C2-B
D2-B
3
Attach Bottom Row of Back Tiles to
Baseplate
position the bottom row of back tiles (A1-B, B1-B) then
(C1-B, D1-B) on the baseplate. The magnets should
help you align these properly.
a
b
Next install the baseplates using the included screws
(3-15-0842).
c
Optional:
You can also mount the baseplate to the
floor by using 3M VHB tape 0.060" or thicker. We
recommend using VHB 4991 or VHB 4624. Apply tape
every 12" as shown in diagram below.
Mark the floor where you intend to install the Seeyond
partition. Once the position is marked, position the
baseplate. The actual partition overlaps the baseplate
on all sides by 3/4" (except where adjacent to another
baseplate) so keep that in mind when positioning the
baseplate. if using anchors follow Steps 2a-b, if using
VHB Tape follow Step 2c.
Attach with Anchors
Attach with VHB Tape
12"
12"
12"
12"
12"
* When mounting with VHB Tape, the partition can tip.
It is recommended to use anchors (Steps 2a-b) for
permanent installation.
For more information, please visit 3-form.com or call 800.726.0126
April 2018 | MAN-rTG-200-48 | rEV 002 © 2018 3form, inc. All rights reserved.
5
