Assemble Panels
The S5 side panels are made from thicker 1/4" acrylic to provide more structural rigidity. Do not
try to bend the 1/4” acrylic! The S4 version has 1/8” acrylic or 1/4” wood side panels.
1. Attach The Front Door Frame Corners
Each of the corners on the enclosure will be held together by the connectors pictured below. There are
only two versions L and R, which can be identified by the letters stamped on the inside. The opposite
connectors are identical, i.e. Bottom Right is the same as Top Left. In all cases the surface of the
connector with the cutout pattern faces front or back.
The front door is designed so that the latches
are on the left. Attach the corner connectors on
the
back side
of the door frame using the
provided cap head 14mm screws. See the
photos below. The top of the connector should
be flush with the top of the acrylic.
Top Left
Top Right
Bottom Left
Bottom Right
!
!
!
Copyright 2019 3DUpfitters
5
