3Doodler Creater, Manual

Page: 5 / 21

3
HI
LO
OFF
Slide Control Switch to HI .
Light will glow RED while the Pen is reaching the temperature
required to melt your Plastic . Once Light has turned BLUE ,
your Pen is ready to extrude Plastic .
Step 1: Turn on your 3Doodler and
wait for it to heat up
Plug in 3Doodler Pen .
Power Adapter
Light to BLUE
60-90
secs
Step 2: Load and extrude Plastic
Making sure the Light is still
BLUE , push the Plastic through
the Plastic Loading Port .
BLUE Light
Using your thumb and
forefinger, gently grip and
turn Plastic clockwise while
pushing into Plastic Loading
Port until you feel the strand
pulled through the Drive Gear
on its own.
Clockwise twist
Select one strand of ABS
(MATTE) Plastic (provided in
your 3Doodler box).
Click FAST button once and
release. You will hear the
Drive Gear start.
x1
1
1
3
When loading Plastic , ensure
it reaches the area towards the
end of the
Maintenance Cover
in order to be gripped fully.
5
10-15
secs
After 10-15 seconds, Plastic
will begin extruding from the
Nozzle . Extruded Plastic will
harden after a few seconds.
6
3
2
2
4
Press the FAST button once to
stop extruding.
x1
7