3Doodler Creater, Manual

Page: 13 / 21

11
It takes around 60-90 seconds for your Pen to heat up. If, after
that time, the Pen still does not heat up and the Light remains
RED , turn the Pen ON and OFF and try again. If that still does not
work, please contact us at help@the3Doodler.com and we will
assist further.
8. My Pen won’t heat up!
(light stays red).
SECTION 4: TIPS AND BEST
PRACTICES
• For optimal Doodling, we suggest using the correct temperature
settings for your Plastic .
• DO double check which type of Plastic you are using before
you turn on the 3Doodler and insert a Plastic strand. If your
Plastic strands get mixed up, here is a handy table for sorting and
identifying what you’re working with.
Pay attention to Plastic types
and settings
ABS (MATTE):
Temp: HI Temp
Light: BLUE
Feature: Great for drawing in the air.
How to tell: Plastic has white
semi-circle ends.
PLA (GLOSSY / CLEAR /
METALLIC / SPARKLE ):
Temp: LO Temp
Light: GREEN
Feature: Eco-friendly and glossy,
making it perfect for artistic
creations.
How to tell: Very rigid, no white
semi-circle ends.
FLEXY:
Temp: HI Temp
Light: BLUE
Feature:
Make flexible,
bendable Doodles.
How to tell:
Plastic is very flexible.
HI
LO
OFF
HI
LO
OFF
HI
LO
OFF
Unsnipped Ends
VS
Snipped Ends
Do not forget to snip your
Plastic ends
• After removing a Plastic
strand from the 3Doodler , cut
and remove any partially melted
material at the end of your
strand before re-feeding it into
the
3Doodler . This will reduce
blockages or clogging issues.
• DO NOT pull Plastic from the back of the 3Doodler other than
as directed.
Double click either Speed
Button and the Light will start
flashing to signal the
Plastic is
reversing.
With the Pen set to HI , wait for
the BLUE Light to come on.
Reverse and remove Plastic
correctly
BLUE Light
HI
LO
OFF
x2
Flashing
BLUE
1 2