S
OFTWARE
C
ONFIGURATION
3Dlabs Wildcat Realizm Graphics Accelerator User's Guide
26
Configuring Display Configuration
To configure your display configuration, select Standard or Clone Desktop mode. Click on the “Advanced”
button to access display features for edge blending and overlap.
Configuring Dual Head Mode
1. Click the desktop with your right mouse button (or left-click if you’ve changed your default
mouse setup) to access the Display Control Panel.Select Properties from the menu that
appears.
2. Choose the Settings tab.
3. Select the grayed out monitor
4. Check the box “Extend my Windows desktop onto this monitor.”
5. Click the “Apply” button.
To revert to single head mode repeat the above procedure, but this time complete it by unchecking the
button “Extend my Windows desktop onto this monitor.”
Cloning your desktop
1. To clone your desktop onto a second monitor, you must first have your secondary monitor
properly plugged into your graphics card. See “Connecting the Display” in the
Software
Configuration
section for instructions. Click the desktop with your right mouse button (or
left-click if you’ve changed your default mouse setup) to access the Display Control Panel.
2. Select Properties from the menu that appears.
3. Choose the Settings tab.
4. Click the Advanced button and then select the 3Dlabs tab.
5. Click the Displays icon on the left, then from the dropdown menu, select option 2.
