manualshive.com logo in svg

3Dlabs The Wildcat 4110 PRO, User Manual

Share
Download
3Dlabs The Wildcat 4110 PRO User Manual Download Page 13

 

 

 
 
 

7 

 

 

 

Collect Materials and Tools 

Make sure you have the following items:  

♦  

3Dlabs Wildcat 4110 PRO video card 

♦  

Delivery media with the 3Dlabs Wildcat 4110 PRO video display driver 

♦  

Flat-head or Phillips screwdriver 

♦  

Monitor cable supplied with your computer or with the monitor 

♦  

Your computer’s documentation 

♦  

Grounding wrist strap 

Take Anti-static Precautions 

Static electricity can damage the components inside a computer or on a printed circuit card. To reduce the 
possibility of electrostatic discharge:  

♦  

Turn off power to the computer. 

CAUTION:  Physically remove the power cord from the system and wait 15 to 30 seconds for 

standby power to dissipate. Damage can occur to add-in components if power is not 
physically removed from the system during installation procedures.  

♦  

Touch the metal chassis of the computer to drain off any static electricity before touching 
the card. 

♦  

Wear a properly connected grounding wrist strap when handling the card or working in 
the computer. 

♦  

Do not wear wool or polyester clothing. 

♦  

Work in an area with a relative humidity of at least 50 percent. 

♦  

Keep the card in the anti-static bag until you are ready to install it. 

♦  

Handle the card as little as possible and only by the edges. 

Summary of Contents for The Wildcat 4110 PRO









































Reviews:

No comments

Brands by name

Popular brands

Load more brands