3DLabPrint Hawker Sea-Fury FB 11, Assembly & User'S Manual

Page: 5 / 37

T
3D Printed project by ADDIMP 3D
5- Requirements
All parts are printable on a 200 x 200 x 200 mm 3D printer with 0.4 mm nozzle.
Slicing software is Simplify 3D, all factory and G-codes files are provided for Ø1.75mm PLA materials.
All the printed parts need less than 1kg of PLA.
A profile for Simplify 3D is proposed as example in the directory ../factory (MK3PLA-3DP.fff)
Setup :
- 3S – PLA std:
o
Engine Pro-tronick DM 2825 - 950 kV
o
Engine Roxxy C3542 – 810 kV
o
ESC Pro-tronik 40 / 45 A
o
Battery LiPo 3S / 1800 to 2200 mA – 45C
- 6S :
o
Racerstar 4106 – 600 kV
o
Emax 3515 – 650 kV
o
propeller 9x6 or 9x7
o
ESC 40 / 45 A
o
Battery LiPo 6S – 1800 mA

Check the connectors between ESC and battery
- 3 (or 4) servos 8 à 16 g like Savox SH-0255 MG, Hitec HS-53, Hitec HS-40
Recess for balance