T
3D Printed project by ADDIMP 3D
17-
Pilots Please Attention !!
-
For the first flights we recommend to reduce the displacement for elevator and aileron to +/- 8mm.
-
Make sure the battery is well fixed in proper position. If it moves during flight it will cause the
CoG move aft and can lead to uncontrollable flight behavior.
-
Check motor mount and screws before each flight...
-
Do NOT leave this PLA plane on direct summer sun or in car. (max. PLA temp is about 50°C)
-
Never fly aft positioned Center of gravity.
-
Flying at high speed and practicing high-G maneuvers puts the airframe of the aircraft under great
stress which can lead to breakage in flight.
o
➔
Be vigilant and careful when you practice this type of flight, no express or implied
warranties do not engage ADDIMP 3D or its partners.
o
-
Respect your local reglementation for flying.
Please, use these files only for your own purpose.
Do not send it further.
Thank you very much and enjoy your flight.
18-
Informations and contact
For all informations, please contact us :
Main page
https://www.facebook.com/addimp3d
Group for RC planes
https://www.facebook.com/groups/addimp3d.rc.planes.group
Follow us on our
Summary of Contents for Hawker Sea-Fury FB 11
Page 16: ...T 3D Printed project by ADDIMP 3D F1 normal or long nose F2 F3 F4 F5 2 axis F6 2 axis only ...
Page 17: ...T 3D Printed project by ADDIMP 3D F5 3 axis H Stabilizer Fixed rudder V stab with rudder ...
Page 26: ...T 3D Printed project by ADDIMP 3D Finish with gluing F7 and the vertical stabilizer ...
