page
2
... print your plane | www.
3DLabPrint
.com
Focke-Wulf Ta 152 C
–
fully printable update for Ta 125 version C - short wing
Extensive hi-tech 3d structural reinforcement
making the model very
rigid while maintaining a lightweight airframe and exact airfoil even it’s just a plastic. This
perfect and exact 3d structure is possible only thanks to additive 3dprinting technology. So
welcome to the 21st century of model flying and be the first at your airfield.
Easy to assembly,
you don’t need any extra tools or hardware, just glue printed
parts together and make pushrods for control surfaces. The rest of the assembly is very
easy. Simply add brushless motor, ESC, servos and radio system. Don’t worry, detailed step
by step PDF/VIDEO is included.
You’ll get a superb performing airplane with highly efficient powerplant capable of flying 7+
minutes at full throtle and speeds exceeding 110 kph (HP setup). Low stall speed is achieved
for easy landing on the other hand.
Note: this upgrade includes only shorter C version wing, F2 and F4 fuselage parts with ACES
wing holder and motor holder. You will need
for all mandatory parts.
version C
960 mm / 37.8 inch
version H wingspan
1236 mm / 48.2 inch