Installation / Change of filament
6.
7.
8.
9.
Load the material into the fi-
lament sensor located inside
the filament compartment.
Continue to load about 40
cm of it until you clearly feel
resistance.
Choose the
Insert filament
option from
the menu repeatedly while at the same
time pushing the filament at the opening
of the sensor. The extruder should draw
the material, resulting in a mild increase
in the filament’s downforce. Choose the
option Insert filament until the material
comes out of the print head. Remove ex-
cess filament with tweezers.
Place the roll of material
on the roller and close the
door of the filament com-
partment.
From the menu, select
Exit
.
Following this procedure, the
printer is ready to print using
the new filament.
20
6.
7.
8.
9.
Back
Finish
