3DCPI 3DCPI-03, Startup Manual

Page: 21 / 38

3DCPI-03
START-UP GUIDE
nozzle temperature to compensate.
Nozzle temperature is the melting temperature of filament,
different manufactures have different melting temperature,
general use 210 degrees with PLA, ABS with 240, too high or
too low temperature can cause abnormal filament feed.
Heated table panel can stick the model firmly; it can also
prevent the ABS model Alice, general use 45 degree.
Types of support structure build. "Touching build plate" is the
most commonly used support setting. None does not do any
support. Touching build plate only creates support where the
support structure will touch the build platform. Everywhere
creates support even on top of parts of the model.
Touching
build plate
Everywhere
use support
material