3DBIZZ 3Dfeedy Instruction Manual Download

Page: 25 / 25

Service and Maintenance » Cleaning and Maintenance

Version 1.0

25 von 25

Cleaning and Maintenance

•

Grease the gearbox whenever you grease your 3D-printer but at least once a year.

•

Clean the 3Dfeedy carefully with a brush or very carefully with compressed air whenever it is dirty.

Waste Management

Sustainability is very close to our hearts. For this reason, we want to make recycling as

easy as possible to help reduce waste. By disassembling it into individual components,

it is possible to dispose of our 3Dfeedy in a recycling-friendly way. All plastic parts are

made of PLA.

Further Information

For detailed information, please visit the following links:

Feedy Converter

www.3dbizz.com/downloads

All manuals (multilingual)

www.3dbizz.com/manuals

All user guides
(multilingual)

www.3dbizz.com/guides

FAQs

www.3dbizz.com

PDF-version of all
manuals and guides

www.3dbizz.com/downloads

Warranty

www.3dbizz.com/warranty

Have fun with your 3Dfeedy

and don’t hesitate to ask us if you have any questions

3DBIZZ UG (haftungsbeschränkt)

Zur Au 8 | 85256 Vierkirchen | Germany

[email protected]

www.3dbizz.com

Summary of Contents for 3Dfeedy


























Search results

Summary of Contents for 3Dfeedy

Reviews:

Related manuals for 3Dfeedy

Brands by name

Popular brands

3DBIZZ 3Dfeedy, Instruction Manual

Search results

Summary of Contents for 3Dfeedy

Reviews:

Related manuals for 3Dfeedy

Brands by name

Popular brands